Tech Support Guy banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I was playing around with my overclocking settings on my recently new asus p5n-d. It has ai tuning which gives me the option to overclock 5%, 10%, 15%, 20%. I decided after playing around with other overclock settings ( got up around 2.66 ghz without heat issues) to go for the 20% and see how it would run. I picked it, saved to bios and restarted. Upon restarting my bios updated itself (flashed?) and then restarted. Upon restart I have no display yet everything appears to be running. If i remove my ram i get the usual ram beeps, no beeps if i remove my video card. I pulled my cmos battery a few times leaving it out for hours to no avail. My monitor also claims to be getting no input. Any help would be greatly appreaciated.

Specs:
Asus p5n-d 750i
Intel q6600 G0
Zotac 9600gt 512mb
2x2 gigs OCZ 1066mhz
500gb sata
500w Bluestorm PSU

Thanks
-Alex
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top