Tech Support Guy banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
1,186 Posts
Discussion Starter · #1 ·
Hi

I have a HP Easynote K5305 Model no. MIT CA102

On pressing the On button, all I get is the Packard Bell Welcome Screen with Press F2 for Setup or F12 for Network.....

Pressing any key makes no movement - it hangs on that screen ?

Could it be the BIOS ?

Hope someone can help

Thanks

Mike
 

·
Banned
Joined
·
11,097 Posts
Try getting in Safemode.

How to Start in Safemode
1. Restart your computer.
2. When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu.
3. Select the option for Safe Mode using the arrow keys.
4. Then press enter on your keyboard to boot into Safe Mode.
 

·
Registered
Joined
·
1,186 Posts
Discussion Starter · #5 ·
Yep, but it won't boot from CD

Won't enter setup either from F2. Does it sound like a MB problem, BIOS battery or PS strength (I measured 18V)

Thanks

Mike
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top