Tech Support Guy banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
i bought a radeon7000 but when i put it in the mobo i don't get any signal at all. nothing, zip. and yes it's very well seated.
i recently fixed my bios (and ithought the aperture value may have needed to be changed) but even after bumping my aperture to 256 (it only has two settings 64 and 256) theres no change.

so what would cause a video card to have NO output?


and here's the basics of my comp:

gateway
tabor mobo
pheonix bios 4.x
working video card: voodoo banshee 16mg (AGP)
non working: radeon 7000 64mg (AGP)


anything else i will get to you ASAP!
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top