Tech Support Guy banner
Status
Not open for further replies.
1 - 4 of 4 Posts

· Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
:rolleyes: Hi

This is the first time I have installed a motherboard, and also the first time I have installed a CPU.

The first problem I have encountered is concerning the AGP 8x graphics card.

The motherboard 'caution section' states;

Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!

MY QUESTION

How can I tell / find out what the voltage is, of my grapics card?

I have looked at the cards printed circuit - and the manuals on the CD but no joy.

GRAPHICS CARD
The graphics card is a: Leadtek Winfast A360 128MB and 256MB
Printed on the card: LR2982 - PCB Rev: B
AGP 8X

MOTHERBOARD
ASRock - 4Core Dual - SATA2

Any help or advice welcome.

Thank you in advance- Stephen
 

· Registered
Joined
·
159 Posts
Supported cards for that board can be found HERE ??question?? you have a PCIE slot why not get a PCIE Graphics card instead.
 

· Registered
Joined
·
159 Posts
Check it out at your loacal store prices have gone down..

Good Luck.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top