Tech Support Guy banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I installed Adaptec Easy Cd and direct Cd Version 4.029 and when I wanted to use the Easy CD, the following come up:

Easy CD Creator Engine initialization has failed. ( Could not create the Engine).

I have uninstalled and re-installed this program several times with the same result.

My system:

P3, win 98 Sony CD RW crx100E

Can please help.
 

·
Registered
Joined
·
11,584 Posts
Dinker
Welcome to TSG!
Roxio has seen this problem many times before and is usually caused by incomplete installations. Here is an article from Roxio
That explains the proceedure to correct the problam and get the engine to fire.
For article Click Here
Let us know if the article solved your problem.
Dave
 

·
Registered
Joined
·
1,843 Posts
One thing to try is to copy the Easy Cd disk to a temporary folder on the hard drive. Completely remove the previous installation(s) and reboot. This time run the Easy Cd install program from the hard drive.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top