Tech Support Guy banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Had a motherboard, or processor, failure on a computer that has Quicken 2007. Hard drive was good. Added the hd to the new computer as secondary drive.

Quicken doesn't open as it's looking for information on C. All the information is now on F.

Checked with Quicken support and they said to do a new install on C.

There has to be a Quicken config file somewhere to change the path from C to F to get it to run without having to reinstall.

Any ideas?
 

·
Registered
Joined
·
4,469 Posts
Had a motherboard, or processor, failure on a computer that has Quicken 2007. Hard drive was good. Added the hd to the new computer as secondary drive.

Quicken doesn't open as it's looking for information on C. All the information is now on F.

Checked with Quicken support and they said to do a new install on C.

There has to be a Quicken config file somewhere to change the path from C to F to get it to run without having to reinstall.

Any ideas?
Can you enter BIOS and select second HD to boot from?
If not disconnect first leaving second as only HD.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top