Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

386 Boot Sequence from A to B

1036 Views 5 Replies 3 Participants Last post by ~Candy~, Nov 7, 2001

Jcapstick

Discussion Starter · Nov 6, 2001

How do I change the Boot sequence on a 386 from A to B drive?
A is 5 1/4 floppy and B is 3 1/2 floppy
I didn't see anything in the BIOS

Save

Status: Not open for further replies.

1 - 6 of 6 Posts

~Candy~

· #2 · Nov 6, 2001

You'll need to enter your bios setup and change it there.....

Is this a combo drive with the a and b drive in the same unit?

Save

Hi Jcapstick

If you can't find anything in the bios (some bioses have a device swap option A to B) just switch the end of the cable plugged in the a drive with the end of the cable plugged in the B drive and enter the bios to redefine your A and B drives. BOL

Save

~Candy~

· #4 · Nov 7, 2001

Hi again Jcapstick, instead of editing your post, hit the reply button after someone has answered the first post....otherwise we won't go back to see that you've added more...

How about the choice to have A on top, B on bottom? Anything like that?

And my question about the combo drive --- are they both in the same unit? or two different bays?

Save

Jcapstick

Discussion Starter · #5 · Nov 7, 2001

The Drives are in seperate bays
5 1/4 is A:\ and B:\is 3 1/2
Booting to A:, I need the B:\ for the 3 1/2 floppy

Save

~Candy~

· #6 · Nov 7, 2001

Take another look at Lurker1's posting....give that a try.

Save

1 - 6 of 6 Posts

Status: Not open for further replies.

Top Contributors this Month