Tech Support Guy banner

Discussions Showcase Albums Media Media Comments Tags

1-5 of 5 Results
  1. Hardware
    Details: 2010 Dell Studio XPS 8100. Raid 0 with two 1 Tb hard drives. Uses Bios only. System image made prior to hdd failure. I am trying to use two 4 Tb hard drives. Since purchasing drives, learned Bios and MBR can go up to only 2 Tb per disk. Clone is 1.8+ Tb, so have to use Raid 0...
  2. Hardware
    Hello. I have 2 SSD drives in RAID 0 currently set for my primary boot drive and would like to undo this to make them 2 separate drives again. The SSD drive is currently being run by some software SSD controller and not a hard one. I would like to make 1 full system image of the drives to use...
  3. Windows 10
    Hi.. My HDD died a couple of days ago and I received a new HDD from my laptop's manufacturer (Dell - Laptop 3568 Vostro). Fortunately I made a system image before the HDD failed (just after installing windows and drivers- the other backup i tried to make after HDD failure didn't work). I tried...
  4. Hardware
    My hdd is faulty and can fail anytime, it is also confirmed by the Dell Support Executive. Dell's SupporAssist application was also giving me notifications about my failing HDD from quite sometime now. They had dispatched a new HDD for replacing the faulty one so we are good. But the problem is...
  5. Windows 10
    I just upgraded win7 ultimate 64 bits to win10 pro 64 bits. My HD is partitioned in drive C (system) and drive D (only data). In windows 7 I used the backup option to save the system image on an external HD. At least once a month, I restore the image, run all the updates and make a new system...
1-5 of 5 Results
Top